Welcome to MYCNCSHOP.COM , One-stop Online Shopping for CNC Part!

400W air-cooled spindle+bracket+PWM governor

  • รุ่น:  400Wsetd
  • สถานะสต็อค:  In Stock
  • เวลาการจัดส่งสินค้า:  จัดส่งภายใน 1-5 วันทำการ
  • การส่งสินค้า:  จัดส่งฟรีระหว่างประเทศแบบประหยัด | จัดส่งไปทั่วโลก | ดูรายละเอียด
  • นภาษีนำเข้า:  เราสามารถประกาศตามคำขอของผู้ซื้อได้
  • ภาษีจะได้รับจากศุลกากรปลายทางและผู้ซื้อมีหน้าที่รับผิดชอบในการชำระเงิน
  • การชำระเงิน:   Credit Cards processed by PayPal
$92.00




  Condition:Brand NEW

  Model:400W Air-cooled spindle

  This item include:
    1Pcs 400W Air-cooled spindle
    1Pcs Mount Bracket
    1Pcs PWM Governor

  400W Spindle motor parameters:
    Working voltage: 12-48VDC (DC)
    Power: 400W
    Speed: 3000-12000r/min (12V-3000 rpm, 24V-6000 rpm, 36V-9000 rpm, 48V-12000 rpm)
    Torque: 500mN.m
    Insulation resistance: > 2 megohms
    Dielectric strength of insulation: 400V
    Diameter: 52mm
    The radial runout of the main shaft is about 0.02-0.05.
    It can be used to engrave materials such as metal or non-metal.
    The spindle comes with forced air cooling and can work for a long time.

  PWM DC brush motor governor:
    Working voltage: DC12V-DC60V (limit 65V)
    The default potentiometer control (5K-100K feasible) default value is 10K;
    Analog 0-5V control, (unplug the XH2.54-3P potentiometer plug, connect the signal line to the middle pin of XH2.54-3P, and connect the ground line to the rightmost pin of XH2.54-3P).
    The MACH3 interface terminal supports external PWM signal input to control the speed regulation. The external PWM input requirements are: level 3.5-12V VPP, frequency 1K-10KHZ, suitable for MACH3 spindle control speed regulation, (note that the external PWM signal control needs to unplug the XH2 .54-3P potentiometer plug control takes effect, otherwise it cannot be controlled).
    Rated current: 12A, overload short-circuit protection current 15A. (The output of overcurrent is cut off, the overcurrent indicator flashes, the potentiometer reset indicator goes out, and the overcurrent protection is released).
    Soft start function, to prevent the motor and power supply from being damaged due to excessive starting current of the motor at the moment, (default 0 second soft start), adjustable from 0 to 5 seconds.
    Control power: 12V140W, 24V280W, 36V400W, 48V550W, 60V700W
    PWM range: 0%-100%

    เกี่ยวกับการจัดส่งสินค้า
  • ภาษีนำเข้าภาษีจะได้รับจากศุลกากรปลายทางและผู้ซื้อมีหน้าที่รับผิดชอบในการชำระเงิน.
  • เราสามารถประกาศตามคำขอของผู้ซื้อได้.
  • กรุณาทิ้งหมายเลขโทรศัพท์ของคุณไว้เมื่อสั่งซื้อเพื่อความปลอดภัยในการจัดส่ง.
  • โดยปกติหากน้ำหนักบรรจุภัณฑ์ไม่เกิน 2 กก. เราจะให้บริการจัดส่งฟรี (จัดส่งทางไปรษณีย์ทางไปรษณีย์) หากคุณต้องการจัดส่งที่รวดเร็วขึ้นเพียงชำระค่าส่วนต่างค่าขนส่งเรายังมีบริการ EMS、 DHL、 UPS อีกด้วย.
  • หากน้ำหนักบรรจุภัณฑ์มากกว่า 2 กิโลกรัม เราจะจัดส่งให้ฟรีโดยด่วน แต่หากพื้นที่ของคุณเป็นของพื้นที่ห่างไกลด่วน คุณจะต้องชำระค่าบริการระยะไกลเพิ่มเติม มิฉะนั้น เรามีสิทธิ์ที่จะยกเลิกธุรกรรม.

  • ติดต่อเรา:
  • หากคุณมีคำถามใดๆกรุณาส่งอีเมลถึงเรา,เราจะตอบกลับภายใน 8 ชั่วโมง.
  • เราจะพยายามอย่างดีที่สุดเพื่อแก้ปัญหาบริการหลังการขายปัญหาใดๆโดยเร็วที่สุดและให้บริการลูกค้าที่ดีที่สุดแก่คุณ!

Tags: Air-cooled spindle